CarteBlanche Ukraine map is compatible with the following Garmin software: MapSource, Mobile
PC, Mobile XT.
The list of compatible navigation devices includes the series of GPSMAP60, GPSMAP76, GPSMAP376, GPSMAP96*, GPSMAP296*, GPSMAP396*, GPSMAP496*,
StreetPilot, Nüvi, Zūmo, Colorado, Oregon, Dakota. Some out-of-date devices with a small internal memory volume, such as GPS V, eMap, eTrex Legend,
eTrex Vista allow the installation of some map regions only.
*in the Automotive mode only.
CarteBlanche Ukraine map will work with the following Garmin software: Mobile PC, Mobile XT.
The list of compatible navigation devices includes:
Garmin
Aera
Astro
GPSMAP60Cx, GPSMAP60CSx
GPSMAP62, GPSMAP62S, GPSMAP62St
GPSMAP76Cx, GPSMAP76CSx
GPSMAP78, GPSMAP78S, GPSMAP78SС
GPSMAP 620, GPSMAP 640
Dakota 10, Dakota 20
Edge 605, Edge 705
from eTrex series – Legend Cx, Legend HCx, Venture Cx, Vista Cx, Vista HCx
Rino 520HCx, Rino 530HCx
from StreetPilot series: – 7200, 7500, c310, c320, c330, c340, c510, c530, c550, c580, i2, i3, i5
from Nüvi series – all devices
from Zūmo series – all devices
from Colorado series – all devices
from Oregon series – all devices
from BMW Motorrad series – Navigator III, Navigator III Plus, Navigator IV, zumo
from BMW Portable series – Navigation Device, Navigation Plus 710, Navigation Plus 760, Navigation Pro 860, Navigation Pro 880
MINI Portable Navigation Device
Honda Nuvi 350
Hyundai Nuvi 360
Nissan Nuvi 750
Samsung Mobile Navigator
GVN 53
GarminASUS
PDAs M10, M20
Kenwood
multimedia navigation systems: DNX5220, DNX5220BT, DNX5240, DNX5240BT, DNX7200, DNX7220, DNX7240BT, DNX8220BT, DNX9240BT, KNA-G421, KNA-G421V, KNA-G510, KNA-G520
Garmin MapSource software is incompatible. Navigation devices using memory cartridges, such as GPSMAP176, GPSMAP276, GPSMAP296, GPSMAP396, GPSMAP496 and other, as well as navigation devices without microSD/SD memory card slot, unable to work in removable disk mode, or not having enough internal memory to upload the whole map of Ukraine will also be incompatible with the map in NT format.
Not less than 150 MB of free internal memory or free memory on the SD card is necessary to install CarteBlanche Ukraine NT 2010.06 map.
To use a Cyrillic map you need to have Cyrillic (Ukrainian) fonts installed on the device. If such fonts are not installed, first contact Garmin dealers in Ukraine in order to modify the device adding a localized firmware version to it.
Our installer software supports the direct installation of the map onto the navigation device, provided that it is connected to the PC in the removable disk mode. Please follow the instructions provided on the update download page, as well as the ones which appear on the screen when you are using the installer software.
Unit ID of your GPS navigaton device can be found in its menu, usually on the same screen, where
your navigaton device's software version is shown. Please see User Manual of your GPS navigaton device.
For example, this is how to see the Unit ID in Garmin nüvi 710 GPS navigaton device:
A lot of Garmin navigation devices are supplied with CityNavigator Europe maps, preinstalled by the manufacturer. This map includes a basic low-detailed coverage of the territory of Ukraine. However, when installed on the device, this map has a priority over CarteBlanche Ukraine map and therefore will be used for routing and address search if it is not switched out for the time of your stay in Ukraine. In general, the procedure of switching out the map depends on the menu organization of the device itself. For example, in the popular Nüvi and Zūmo series navigation devices this can be done by choosing Menu (an icon with a wrench) -> Map -> Map Info or Menu (an icon with a wrench) -> Settings -> Map -> Map Info and unmarking the checkbox next to CityNavigator Europe, leaving it marked next to CarteBlanche Ukraine.
Garmin MapSource program is a licensed Garmin product which can be purchased from the dealers of the company. Some of the Garmin navigation devices are complemented with Trip and Waypoint Manager program, which can be upgraded to the latest version of MapSource. In addition, the MapSource program can be found on the disks with Garmin cartographic products. To use them on a PC, it is necessary to install the basic version of Garmin MapSource or Trip and Waypoint Manager first, and then to proceed with overwriting it with an update from the site.
To unlock the map in the Garmin MapSource application (versions below 6.14.1) please
follow the procedure.
Starting from 6.14.1 version of the Garmin MapSource the map unlock procedure has been changed. Now, to unlock the map in MapSource, you should
follow the procedure described below:
To unlock our map in MapSource 6.14.1 you need to follow next steps (back translation of menu points is free):
1. Click on “Utilities” -> “Map Control”
2. Select “Unlock Regions” -> click on “Add...” button
3. Type (or copy/paste) the 25-character unlock code for CarteBlanche Ukraine
4. Add comment if necessary (optionally).
TomTom navigation devices use their own map format, which is different from Garmin or iGO formats. That is why our map is not compatible with TomTom devices and software.
Only updates for the MapSource application are available on the site. See “How to install and where to update the MapSource application?”.
To do this you need to download updates for Garmin MapSource and CarteBlanche Ukraine map to the latest versions.
Please use a computer with the Windows operation system in an Internet café.
Please fill in the form. The 25-character unlock code will be sent to your email address indicated in the form. If you do not receive an email with the code in a long time, please check the Spam folder of your mailbox and revise your antispam settings. You may also try indicating another email address.
This may happen if Login or Password is not entered correctly. The next time the system may take
incorrect values which have been entered earlier from the cache, and the situation may reoccur. To avoid this please press “Ctrl+F5” keys or click
the “Refresh” on-screen button in you Internet-browser and enter the Login and Password attentively once more.
In case you do not succeed, please contact our technical support service.
Unit ID of your GPS navigaton device can be found in its menu, usually on the same screen, where
your navigaton device's software version is shown. Please see User Manual of your GPS navigaton device.
For example, this is how to see the Unit ID in Garmin nüvi 710 GPS navigaton device:
To unlock the map in the Garmin MapSource application (versions below 6.14.1) please
follow the procedure.
Starting from 6.14.1 version of the Garmin MapSource the map unlock procedure has been changed. Now, to unlock the map in MapSource, you should
follow the procedure described below:
To unlock our map in MapSource 6.14.1 you need to follow next steps (back translation of menu points is free):
1. Click on “Utilities” -> “Map Control”
2. Select “Unlock Regions” -> click on “Add...” button
3. Type (or copy/paste) the 25-character unlock code for CarteBlanche Ukraine
4. Add comment if necessary (optionally).
Only updates for the MapSource application are available on the site. See “How to install and where to update the MapSource application?”.
If you have a coupon with a relevant number and code, visit the map unlock page
and fill in the form. You will receive the 25-character unlock code on the email address indicated in the form.
If you cannot find the coupon, please contact the technical support service
and indicate the internal Unit ID of your navigation device (Unit ID).
When purchasing CarteBlanche Ukraine map you receive the right to use this map on one device. To unlock and use the map on another device you need to purchase one more license with a different code and coupon number.
To update the map, you need to know the (Unit ID) of the navigation device and to receive the 25-character unlock code. Then you should
visit webpage and choose Download an update. It is necessary to type or copy
from the email the 10-character unit ID of the device into the upper line (Login/User) of the pop-up window. In the lower line (Password) you
need to enter the 25-character unlock code.
When typing the codes you need to have the “CapsLock” key activated. The code must include the dashes. Although the number of characters visible
in the password line is limited, it should be taken into consideration that the printed characters shift to the left; they may be counted using
arrow keys “<-“ and “->”.
When copying the codes from the email, in order to avoid copying an extra space please select the text in the reversed direction (starting from
the end of the code).
If Login and Password are entered correctly, you will be forwarded to an update download page. Please download the update file and save it on the
hard drive of your PC. Please make sure that the size of the downloaded file is equal to the one indicated on the update download page. To update
the map please follow the instructions available on the update download page.
Garmin navigation devices are designed so that with every subsequent update the maps which had
been installed earlier are deleted. That means that you should install the full set of all the necessary maps every time. Addition of new maps
to the ones installed earlier is not supported. However, this is not the case with the maps that have been pre-installed by the manufacturer.
When using maps from different sets, for example, CarteBlanche Ukraine and GPMapa Polska, you can choose one of the following ways:
1. Save each map in a different memory area, that is install one map onto the internal device memory and the other onto an SD card.
2. You can use Garmin MapSource program to install both map sets on your PC for their usage with this program. After that please select the necessary
areas for installation in each map set separately and install all the selected at once.
Garmin MapSource program is a licensed Garmin product which can be purchased from the dealers of the company. Some of the Garmin navigation devices are complemented with Trip and Waypoint Manager program, which can be upgraded to the latest version of MapSource. In addition, the MapSource program can be found on the disks with Garmin cartographic products. To use them on a PC, it is necessary to install the basic version of Garmin MapSource or Trip and Waypoint Manager first, and then to proceed with overwriting it with an update from the site.
Only updates for the MapSource application are available on the site. See “How to install and where to update the MapSource application?”.
CarteBlanche Ukraine map is compatible with the following Garmin software: MapSource, Mobile
PC, Mobile XT.
The list of compatible navigation devices includes the series of GPSMAP60, GPSMAP76, GPSMAP376, GPSMAP96*, GPSMAP296*, GPSMAP396*, GPSMAP496*,
StreetPilot, Nüvi, Zūmo, Colorado, Oregon, Dakota. Some out-of-date devices with a small internal memory volume, such as GPS V, eMap, eTrex Legend,
eTrex Vista allow the installation of some map regions only.
*in the Automotive mode only.
The menu of the Garmin Nüvi series navigation devices includes two variants of search: Where to -> Address for address search in the cities with detailed coverage including address database, and Where to -> Cities for the settlements without a detailed city map and address search. In the second case the device provides a list of the settlements sorted by the increasing distance from the point of cursor position on the map, within 20 km around the cursor. To find a more distant settlement please go to the map page (View Map), set a convenient scale, move the map so that the cursor is situated in the necessary area and click the “Set Loc.” on-screen button -> click the “Back” on-screen button -> click the “Menu” on-screen button -> Where to -> Cities. Then choose the needed settlement from the list.
It depends not only on the map, but also on the navigation device itself. Please check it before purchasing a navigation device.
To use a Cyrillic map you need to have Cyrillic (Ukrainian) fonts installed on the device. If such fonts are not installed, first contact Garmin dealers in Ukraine in order to modify the device adding a localized firmware version to it.
Please copy the files in .gpi format into Garmin/poi folder into the internal memory of the device or onto an SD card.
This is characteristic of old map versions. In the latest version of the map the problem is eliminated.
If you find any inaccuracies on the map, please fill in the form.
We will be grateful if you provide an up-to-date track and/or otherwise illustrate the map fragment. All notices will be considered by our cartographers
and taken into account in one of the next map updates.
We expect this problem to be removed in one of the next updates.
If you have a coupon with a relevant number and code, visit the map unlock page
and fill in the form. You will receive the 25-character unlock code on the email address indicated in the form.
If you cannot find the coupon, please contact the technical support service
and indicate the internal Unit ID of your navigation device (Unit ID).
A lot of Garmin navigation devices are supplied with CityNavigator Europe maps, preinstalled by the manufacturer. This map includes a basic low-detailed coverage of the territory of Ukraine. However, when installed on the device, this map has a priority over CarteBlanche Ukraine map and therefore will be used for routing and address search if it is not switched out for the time of your stay in Ukraine. In general, the procedure of switching out the map depends on the menu organization of the device itself. For example, in the popular Nüvi and Zūmo series navigation devices this can be done by choosing Menu (an icon with a wrench) -> Map -> Map Info or Menu (an icon with a wrench) -> Settings -> Map -> Map Info and unmarking the checkbox next to CityNavigator Europe, leaving it marked next to CarteBlanche Ukraine.
CarteBlanche Ukraine map is compatible with the following Garmin software: MapSource, Mobile
PC, Mobile XT.
The list of compatible navigation devices includes the series of GPSMAP60, GPSMAP76, GPSMAP376, GPSMAP96*, GPSMAP296*, GPSMAP396*, GPSMAP496*,
StreetPilot, Nüvi, Zūmo, Colorado, Oregon, Dakota. Some out-of-date devices with a small internal memory volume, such as GPS V, eMap, eTrex Legend,
eTrex Vista allow the installation of some map regions only.
*in the Automotive mode only.
The menu of the Garmin Nüvi series navigation devices includes two variants of search: Where to -> Address for address search in the cities with detailed coverage including address database, and Where to -> Cities for the settlements without a detailed city map and address search. In the second case the device provides a list of the settlements sorted by the increasing distance from the point of cursor position on the map, within 20 km around the cursor. To find a more distant settlement please go to the map page (View Map), set a convenient scale, move the map so that the cursor is situated in the necessary area and click the “Set Loc.” on-screen button -> click the “Back” on-screen button -> click the “Menu” on-screen button -> Where to -> Cities. Then choose the needed settlement from the list.
We expect this problem to be removed in one of the next updates.
TomTom navigation devices use their own map format, which is different from Garmin or iGO formats. That is why our map is not compatible with TomTom devices and software.
To use a Cyrillic map you need to have Cyrillic (Ukrainian) fonts installed on the device. If such fonts are not installed, first contact Garmin dealers in Ukraine in order to modify the device adding a localized firmware version to it.
When purchasing CarteBlanche Ukraine map you receive the right to use this map on one device. To unlock and use the map on another device you need to purchase one more license with a different code and coupon number.
Please use a computer with the Windows operation system in an Internet café.
This is characteristic of old map versions. In the latest version of the map the problem is eliminated.
© 2005–2010 CarteBlanche Ukraine Ltd.